Scrap Wire Stripper/Copper Wire Stripping Machine/Waste Wire Peeling Machine

Group Wire stripping machine
Min. Order 1 piece
Terms of Payment T/T, Western Union, MoneyGram
Update Time 2016-09-19
Item specifics
namewire peeling machine
Wire Stripping RangeDiameter: 1-40mm
Daily Capacity200-1000KG
Wire materialOutsourcing rubber cable,single wire,stranded wires
voltage220V
Power2.2kw
Description
Scrap Wire Stripper/Copper Wire Stripping Machine,/Waste Wire Peeling Machine

GSL-Y-006 Model,is the Newest multi-function wire stripping machine

Functions of Wire Stripping Machine 

This is the new multinational wire stripping machine, is currently the most advanced, function most cable stripping machine dismantling equipment, processing of cable TV line, the three core and four core cable, cable sheathing, mono-filament wire, multi-strand line and filoselle and a variety of sizes and shapes of cable, the blade cut in insulation, after rolling out, the wire core and the skin will be automatically separated out.

Technical data of Wire Stripping Machine

Model

Applicable scope

(mm)

Size(cm)

Output(kg/10h)

Power(kw)

Weight(kg)

GSL-Y-003

Φ1.5-Φ38

53*52*83

100-300

1.5

60

GSL-Y-003-1

Φ10-Φ70

50*50*100

100-500

2.2

62

GSL-Y-004

Φ1.5-Φ38

54*52*84

100-300

1.5-2.2

81

GSL-Y-005

Φ1.5-Φ40

55*52*84

200-1000

2.2

89

GSL-Y-005-1

Φ1.5-Φ38

63*37*48

200-500

1.5

77

GSL-Y-005-2

Φ1.5-Φ45

54*34*48

100-300

1.5

68

GSL-Y-006

Φ1-Φ40

70*55*84

200-1000

2.2

110

GSL-Y-006-1

Φ1-Φ55

62.5*55*84

200-1200

2.2

106

GSL-Y-008

Φ1.5-Φ98

77*55*118

200-3000

3

210

Y-003-1 bigger type

Φ10-Φ120

67*58*110

200-1000

3

110

Y-008-1 bigger type

Φ1.5-Φ120

93*55*128

200-8000

4kw,380v

260

Y-008-3 Special machine

Φ10-Φ200

90*58*135

1200-10,000kg

5.5kw,380v

300

Pictures for Wire Stripping Machine

  

Maintenance for Wire Stripping Machine

1Operator must pay special attention to the safety of hands. FATIGUE OPERATION IS FORBIDEN ! 
2The pressure should not be too tight. Overload work will shorter the life span of the machine.
3If the cable cannot get through, operator has to check whether the belt is loose or the pressure is too light, or the blades are wrong directed.
4If this machine works with heavy duty for a long time, operator has to check the transmission oil capacity, grease lubrication is required on the four shaft gears before working every three months.
5 Keep daily maintenance of the four bearing, any damager of bearing will cause shaft broken easily after continuous operating.
6When work with bigger size cables, the upper shaft should be kept hanging on the same line by both sides.
7Any loosing of the four lifting screw nuts of the transmission and motor have to be adjusted by fastening the chain and V-belt.

Note: the position of transmission and the motor have to be kept parallel


If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below:Choose the right feeding hole, adjust the positioning fixture via the diameter of cable
Adjust the gap between the drove-gears according to the diameter of cable.

Basically, the gap should be smaller than the diameter of cable.

Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture.

Contact information of the wire stripping machine

 Company

Zhengzhou Gashili Machinery Co., Ltd.

Contact Person                          

Nancy

Website

https://gashili.en.alibaba.com


http://gsl-machine.com

Phone No.

0086-13643842763

Tel No.

86-371-60317344

E-mail address

nancy(@)gsl-machine.com

Skype

gashilinancy

whatsapp

0086-13643842763